.svg?crc=296806742){kind=small}
.svg?crc=4172073470){kind=logo}
Design
Parameters
Services
Download
DESIGN FEATURES
- Axially split casing for ease of maintenance
- Heavy duty single row bolting
- Opposed impeller arrangement for thrust
balancing - Different suction and discharge
- BB3.
MATERIALS
- Bronze, Cast Iron, Carbon Steels
- Stainless Steels - 316, 317 SS
- Duplex - 2205
- Super Duplex - 2507
- Super Austenitic - 254 SMO, 654 SMO
- Hastelloy CW12MW, CW6M, N12MV, N7M, CW2M, CX2MW
- TitaniUM Gr.C2, Gr.C3, Gr.C5.
OPERATING PARAMETERS
• Capacities up to 2400 (m3/h) (11000 gpm)
• Head up to 1200 (m) (3937 Feet)
• Power through 2237 (kW) (3000 hp)
• Frequency 50/60 Hz
• Temperatures to 300°F (150°C).
SERVICES
• Primary Water Supply – Fresh water or Sea
water
• Mining Processes - Solvent Extraction/
Electro-Winning (SX/EW), Dewatering,
Tailings & Post Processed Solutions
• Oil & Gas Production – Onshore, Offshore
and Pipeline.
Neptuno Pumps®- General Catalog
-poster.jpg?crc=3881841126 "Neptuno Pumps® - Axial Split Case Multistage Pump (HA) poster")
Neptuno Pumps® - Axial Split Case
Multistage Pump (HA) poster
Axial Split Case Multistage Pumps (HA)
Split Stage Center Bushing
• Allow dynamic balancing of
assembled rotating element.
• Can be removed for
inspection of wear surfaces
without disassembling rotor
assembly
Hydraulic Crossover
• Minimum friction loss,
maximum efficiency.
• Provides permanent axial
hydraulic balance.
Pumpshaft
• Fully machined and
sized for application
thrust and torque
• Different engineered
alloys for aggressive
applications
Dual Volute Heavy-Duty Casing
• Smoothly transitions fluid
• Assures radial balance for
minimum shaft deflection.
• Discharge connections are in
the lower half casing, allowing
removal of upper half casing
for ease on-site inspection
and/or reparation.
Double Suction First Stage Impeller
• Fully investment casted to
provide smooth passageways
for low-loss fluid flow
• Precisely trimmed and
balanced to reduce vibration
and wear
• Available for low NPSH
service requirements.
Oil-Lubricated Bearing Assembly
• Engineered bearing
arrangements to meet
specified operating
requirements.
• Withstands the total
hydraulic thrust
• Easily replaceable radial
bearing
Single Row Bolting
• All nuts located on top for
ease of maintenance.
Opposed Impeller Arrangement
• Provides permanent axial
hydraulic balance.
IMPELLER ARRANGEMENT
Double suction + 2 impellers in parallel
Double suction + 4 back-to-back impellers.
Automatization, Control & Monitoring
Pump Process Control Software
AUTOMATIZATION, cONTROL & MONITORING
Reduce system operation and maintenance costs while increasing process accuracy and protection. The software provides multiple pump control and protection, as well as system monitoring and protection.
- Power rating: 0.75 to 2000 kW (1 to 2500 hp)
- Power supply: 200-240 V, 380-480 V, 575 V and 690 V
- Human Machine Interface (HMI) with backlight,
graphic display and soft-keys, and real time clock - Reduced System Component Cost
- Improved System Reliability
- Reduce Maintenance Costs
- Eliminate Costly Control Panels
- Reduce System Energy Requirements
- Reduce Overall Installation Costs
PUMP PROCESS CONTROL SOFTWARE
Pump Genius software monitors system pressure or flow and references low / high set point and run time requirements. The lead and lag pumps are cycled on and off based on motor run times.
- Starting/stoping motors are selected based on run time - motor with least amount of run time
- All pumps are dynamically alternated based on run times and system set point requirements
- System, motor, drive faults are monitored and alarmed
- Up to 6 pumps dynamically alternated and controlled
© 2019 Neptuno Pumps Ltda. All rights reserved.
